PRINTER COMPONENTS AND OPTIONS3-2 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDERefer to the System Overview manual for a detailed description ofthe features and operation of the printer components.Printer control consoleThe printer control console is the color monitor located on top of theprinter. It contains message areas and graphic displays that alert youto paper jams and other fault and status conditions (such as low dryink). It also contains buttons which allow you to control certainfunctions of the printer (for example, continuing an interrupted job)without returning to the workstation controller.The printer control console has the following features:• Local controls and displays for jam clearance, paper loading/unloading, and diagnostics/service (used by the servicerepresentative). Two types of messages are displayed on theprinter control console: fault messages, which relate to printermalfunctions, and information messages, which relate to printerconditions such as low dry ink.• Touch-sensitive areas that allow you to select options bytouching the printer control console screen. A tone soundswhen you touch one of these areas.• Attention alarm tone consisting of three beeps, repeated forten seconds. The alarm is generated by any event that stopsthe printer and requires operator attention. The alarm may bedisabled by the operator.The tone stops after three cycles, or when the fault condition iscleared or clearing has started (for example, doors or coversspecified in the clearance instructions are opened). You canstop the tone by pressing one of the printer control consolebuttons or by selecting a function through the touch screen.