xiSafety NotesRead the safety notes in this section carefully before you begin to use this machine toensure that you operate the machine properly.This section describes the graphic symbols used throughout this guideis used to alert operators to an operating procedure, practice orcondition that, if not strictly observed, can result in severe injuryor loss of life.is used to alert operators to an operating procedure, practice, orcondition that, if not strictly observed, might result in safety hazards topersonnel or damage to the equipment.This symbol is used to alert operators to a specificoperating procedure that requires close attention.Read and follow instructions carefully to ensure thetask is accomplished safely.This symbol is used to alert operators to a specificoperating procedure that must not be performed.Read and follow instructions carefully.This symbol is used to alert operators to a specificoperating procedure that should be emphasized foroperating safety. Read the instructions carefullybefore performing the required procedure.Installation and RelocationDo not place the machine in a hot, humid, dusty, or poorly ventilated environment.Prolonged exposure to these adverse conditions can cause fire or electric shocks.Do not place the machine near heaters or volatile, flammable, or combustiblematerials such as curtains that may catch fire.Place the machine on a level and sturdy surface that can withstand a weight of 21.4kg (including the printer body, the paper cassette (A3/250 sheets) and the EPcartridge). If tilted, the machine may fall over and cause injuries.The machine weighs 21.4 kg (including the printer body, the paper cassette (A3/250sheets) and the EP cartridge). When moving the equipment, make sure that thereare two or more persons carrying it.Heatedsurface Flammable Electricshock PinchedfingersProhibited No fire Do nottear down Do nottouchInstructions Unplug Ground/Earth
