xviSwitch it off, and if the interference disappears, the machine is the cause of radiointerference. Perform the following procedure until the interference is corrected.● Move the machine and the TV and radio away from each other.● Reposition or re-orientate the machine and/or the TV and radio.● Unplug the machine, TV, and radio, and replug them into outlets that operate ondifferent circuits.● Re-orientate the TV and/or radio antennas and cables until the interference stops.For an outdoor antenna, you should ask your local electrician for support.● Use coaxial cable antennas.Operating PrecautionsDo not place any liquid container such as a vase or coffee cup on the machine. Spiltwater can cause a fire or shock hazard.Do not place any metal parts such as staples or clips on the machine. If metal andflammable parts get into the machine, they can short-circuit internal components,and cause fire or electric shocks.If debris (metal or liquid) gets into the machine, switch off and unplug the machine.Contact your FujiXerox or dealers. Operating a debris-contaminated machine cancause fire or electric shocks.Never open or remove machine covers that are secured with screws unlessspecifically instructed in this manual. A high voltage component can cause electricshocks.Do not try to alter the machine configuration, or modify any parts. An unauthorizedmodification can cause smoke or fire.This equipment is certified as a Class 1 laser product under IEC60852-1 (Class 1).This means that the machine does not emit hazardous laser radiation. Sinceradiation emitted inside the machine is completely confined within the protectivehousings and external covers, the laser beam cannot escape from the machineduring any phase of user operation. Do not perform any operation apart from theinstructions given in the manual. There may be a danger of laser beam leakage.
