I n s t a l l i n g S o f t w a r eC h a p t e r 2 : S e t t i n g U p t h e P r i n t e r v 2-11InstallingSoftwareWindows Setup Follow the steps below to install the Remote Control Panel(RCP), Status Monitor, printer driver, and Font Manager forWindows.DOS Setup Follow the steps below to install the Remote Control Panel(RCP), Status Monitor, and printer driver software for DOS.1 Insert the 3.5” diskette labeled “Xerox DocuPrint 4508Software Installation Diskette” into the disk drive of yourcomputer.2 In the Program Manager, click on File, then click on Run andtype:a:\setup or b:\setupThen click OK.3 Follow the instructions on the screen.4 Insert the 3.5” diskette labeled “Xerox Font Manager” intothe disk drive of your computer. Follow steps 2 and 3.1 Insert the 3.5” diskette labeled “DOS and OS/2 Drivers” intothe disk drive of your computer.2 Switch to the drive in which the diskette was inserted.Example: Type a: or b: then press the return key.3 Type README, then press the return key.4 Follow the instructions on the screen.508-c02.frm Page 11 Thursday, June 6, 1996 12:04 PM
