S e t t i n g U p t h e P r i n t e r2-12 v D o c u P r i n t 4 5 0 8 U s e r G u i d eOS/2 Setup Follow the steps below to install the OS/2 software.Testing theConnectionTo test the connection, make sure that the READY light is ONand print a file from a software program you are familiar with.If the printer does not respond at all when you print the file,perform the following:• Verify that you have installed the 4508 printer driver.• Verify that the interface cable is attached securely to boththe printer and the computer.5 Insert the “Xerox DocuPrint 4508 Software InstallationDiskette” disk in your disk drive.6 Create a directory in which to place the DOS software(for example: DOSUTIL) and switch to that directory.7 Type:copy a:\dosutil\*.* or copy b:\dosutil\*.*8 Type:DOS45081 Insert the 3.5” diskette labeled “DOS and OS/2 Drivers” intothe disk drive of your computer.2 Double click on the drive icon, then double click on diskicon, then double click on “INSTALL.TXT” file. Followinstructions on screen.NoteTo install the Remote Control Panel (RCP) option, use theWindows subsystem of OS/2 and follow the Windowsinstallation instructions on the previous page.508-c02.frm Page 12 Thursday, June 6, 1996 12:04 PM
