Xerox DocuPrint 92C NPS Maintenance Guidance

Also see for DocuPrint 92C NPS: Message guide Quick reference card Installation planning guide Configuration guide System overview guide

XEROX DOCUPRINT 92C NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE 6-16. 6Waste containersThe waste containers in the 92C NPS collect dry ink and developerafter it has been used by the printer. When a container becomes full,it must be replaced, or the printer eventually stops printing. Thischapter contains the procedures for replacing the dry ink anddeveloper waste containers.Checking and replacing the developer waste containerWaste from the developer housings is transported into a sealedcontainer located in the lower left corner at the front of the printer.The waste material is a mixture of black and color developer, and isnot reusable.When the message REPLACE DEVELOPER WASTE CONTAINERdisplays on the printer control console, 1500 more prints can beproduced before the printer stops. The printer does not resumeprinting until you replace the container. The Attention light is amodulated yellow by this stage.