Xerox DocuPrint N4025 Information Manual

Also see for DocuPrint N4025: User guide User guide Service manual Brochure Product reference guide

Contents

Xerox DocuPrint N4025 Information Manual Manual pdf 101 page image

Quick Step (OS/2 Warp Server V 4.0)Chapter 7: OS/2 Network Setup v 7-5Troubleshooting 1 Check cables/drops. Are the LEDs active?2 Print Settings. Check Enabled=ON, IPADDRESS=dhcp/bootp/static (make sure the IP Address resolution is setproperly. Use DHCP if your network uses a DHCP server toassign IP addresses. Use RARP/BOOTP if your network usesBOOTP to assign IP addresses, and use STATIC if you wishto assign a specific IP address).You may set a Static IP Address form the controlpanel if your printer has one. If you are connectedto a network with a Xerox CentreDirect ExternalPrint Server (External Ethernet Adapter) then useARP or NBMON Utility to set a Static IP Address.3 Printer Properties - Using LPD Output Port. WIN-OS2using LPRMON.4 Watch LPRPORTD Screen - Is there Activity? In printerinput light processing?5 It may take a few prints before initial quality responds.Print 10-20 pages first.6 Refer to the DocuPrint System Administrator Guide foradditional information.