Quick Step (OS/2 Warp Server V 4.0)7-6 v DocuPrint Technical Information GuideStep-by-Step Setupfor IBM TCP/IP forOS/2TCP/IP Protocol Configuration1 Acquire two IP addresses for use on your server and yourDocuPrint printer.2 Install TCP/IP for OS/2. Remember to open LAN Adapterand Protocol Support (LAPS/MPTS, etc.) and configure theTCP/IP protocol for your network adapter. (See your OS/2documentation for configuring network adapters for theTCP/IP protocol.)3 Open (double-click) TCP/IP Configuration Object.• Click the Printing tab and enter the following:• REMOTE PRINT SERVER = Printer IP Address in 32-bitdotted decimal notation (e.g. 127.0.0.0).• REMOTE PRINT SERVER’S PRINTER = ps (Enter pswithout quotes and in lowercase.)• MAXIMUM NUMBER OF LPD PORTS = Enter a numberbetween 2 and 64 inclusive.• FOR OS/2 PRINTING ONLY (NO WIN-OS/2) Click theAutostart tab. Highlight lprportd, then click AutostartService, Foreground Session and Minimized.• Close the TCP/IP Configuration Windows. Click SAVE,then reply YES to Update CONFIG.SYS.• Shutdown your server/workstation and reboot.Once completed and you have rebooted, use the“ping” command at an OS/2 Command Prompt toping your server/workstation’s IP address. Repeatthe ping command using your DocuPrint printer’sIP Address to confirm that your printer isconfigured properly for using TCP/IP.
