Xerox Document Services Platform Series Getting Started Manual

Contents

Xerox Document Services Platform Series Getting Started Manual Manual pdf 24 page image

DOCUSP 3.x20 XEROX DOCUMENT SERVICES PLATFORM SERIESGETTING READY FOR THE DOCUSP INSTALLATIONW-8: SNMP Gateway installation worksheetIf the customer is planning on using the SNMP Gateway, fill outthis worksheet.Data Elements Customer ValueEnabled YES NOPrinter ID (OID)(See the Printer OID table)Trap Client LifetimeTrap Client IntervalTrap Polling TimePacket Wait Time 10(not to be changed)Number of Trap Parameters 6Read Community StringWrite Community StringTrap Community StringDomain UDPIP Address or Port NumberPrinter Alert ON OFFCold Start ON OFFWarm Start ON OFFLink Up ON OFFLink Down ON OFFAuthentication Failure ON OFFTrap SNMP Version SNMPV1cW-8 Data elementsEnabled: The System Administrator can enable or disable theSNMP gateway as desired.Printer ID (OID): Select the appropriate identification stringbased on the model of the printer being installed from the tablebelow. This string must be entered exactly as there is novalidation of the string in case of an error.Trap client lifetime: The Trap Client Lifetime determines howlong an active trap will live. Enter a value in seconds, such as300 seconds.NOTE: SNMP keeps a list of traps that are currently active.Active traps that exist longer than the Trap Client Lifetime valuewill be removed from the active list.Trap client interval: The Trap Client Interval determines whenSNMP will check for trap expiration. For example, if the value is60, every 60 seconds SNMP will check to remove any traps (asappropriate) from the active list. Enter a value in seconds.

/ 27

Related manuals for Xerox Document Services Platform Series