Xerox Document Services Platform Series Getting Started Manual

Contents

Xerox Document Services Platform Series Getting Started Manual Manual pdf 5 page image

XEROX DOCUMENT SERVICES PLATFORM SERIES 1GETTING STARTEDInstallation worksheetsThe Getting Ready for the DocuSP Installation guide has beendeveloped for you to use in the gathering of technical data thatwill be required by the Xerox personnel during installation of yourcustomer’s Document Services Platform hardware and software.It is used in conjunction with the appropriate printer installationplanning guide.Using the installation worksheetsThe Xerox printer with DocuSP software provides a wide rangeof network printing services on industry-standard networks, andconsists of the following: the DocuSP controller which is a UNIX-based computerworkstation with a Xerox interface PWB and DocuSPsoftware installed. A supported Xerox printer.Getting Ready for the DocuSP Installation contains theworksheets that must be completed to support the installation ofthe Xerox DocuSP software on the controller.When these worksheets are completed they will contain a recordof the state of the system at the time of install. Most likely, thissetup and configuration state will change, so encourage yourcustomer to keep these worksheets with the service record ofthe printer for future reference.Your customer should not complete the worksheets if they arenot sure of the required information. Always encourage them tocontact the next level of technical support within theirorganization for assistance.NOTE: Worksheet 5, the Novell NetWare gateway installationworksheet, refers to on-site setup requirements that yourcustomer’s network administrator should already haveimplemented prior to the DocuSP install. The values for the dataelements entered during that setup activity should be recordedon this worksheet.