Xerox PHASER 5400 Quick Install Manual

Also see for 5400DX - Phaser B/W Laser Printer: User guide Technical instructions Manual Installation instructions Paper guide

Xerox PHASER 5400 Quick Install Manual Manual pdf 17 page image

Quick Network Install Guide 11In the Add Xerox TCP/IP Port window:a. Under Enter a Port Name, enter a unique name for the portbeing added.b. Under Enter a printer name or IP address, enter the printer’shost name or IP Address.c. Click Next.NoteTo locate Xerox printers on your local area network, selectAuto Printer Discovery, and then click Refresh. The XeroxTCP/IP Port Monitor searches the network for Xerox printersand displays them in a list. Select your desired printer fromthe list and click OK.6. After all the port settings have been configured and verified, aCompleting dialog box appears summarizing all of the settings.You have the opportunity to change any of the settings by clickingthe Back key. Otherwise, click the Finish key to complete the portsetup.7. Click OK to exit from Printer Properties. This completes theinstallation of the Xerox TCP/IP Port.Quick install steps (AppleTalk protocol)1. At the Desktop, right-mouse-click the Network Neighborhoodicon and select Properties.2. Click the Protocols tab and verify that the AppleTalk protocol hasbeen loaded.3. If the AppleTalk software is not present, install it using thedocumentation provided by Microsoft, and then return to thisdocument.4. Open the Control Panel and double-click the Printers icon.5. Double-click Add Printer; the Add Printer Wizard starts.6. Verify that My Computer is selected and click Next>.7. Click Add Port.8. Select the AppleTalk Printing Devices and click New Port.9. Click Ethernet and select the device.