Xerox PHASER 5400 Quick Install Manual

Also see for 5400DX - Phaser B/W Laser Printer: User guide Technical instructions Manual Installation instructions Paper guide

Xerox PHASER 5400 Quick Install Manual Manual pdf 24 page image

18 Xerox Phaser 5400 Laser PrinterRe-configuring an existing port1. Within the Printer Properties dialog box, click the Ports tab.2. Select the TCP/IP port you want to re-configure from the listshown, then click the Configure Port button.3. A dialog box appears listing the current port configuration andallowing you to make changes. The following settings can bechanged:a. Printer Name or IP Addressb. Protocol (Raw or LPR)c. Raw Settingsd. LPR Settingse. Bi-Directional Settings4. Click the OK button after the desired changes have been made.Quick install steps (AppleTalk protocol)1. At the Desktop, right-mouse-click the My Network Place icon andselect Properties.2. Right-click the Local Area Connection icon inside the Networkand Dial-up Connections window. Select Properties.3. Select the General tab, and verify that AppleTalk Protocol isloaded.4. If the AppleTalk software is not present, install it using thedocumentation provided by Microsoft, and then return to thisdocument.5. Open the Control Panel and double-click the Printers icon.6. Double-click Add Printer; the Add Printer Wizard starts.7. Click Next>.8. Click the Local Printer radio button.9. Click Next>.10. Click the Create a New Port radio button.11. Select the AppleTalk Printing Devices from the New Port Typepull-down menu.