Xerox PHASER 5400 User Manual
Also see for 5400DT - Phaser B/W Laser Printer: Technical instructions
                                                                                                                           | |
Contents
| 
User Guide 45Printing JobsPrinting transparenciesYou can print transparencies from the trays or the Multi-sheet BypassFeeder.At the printer:1. Insert the transparencies into a tray or the Multi-sheet BypassFeeder: Rough side is up. Smooth side is down. The stripe enters the printer first. Don’t load transparencies above the indicated mark on theback of the tray or side of the Multi-sheet Bypass Feeder.2. If you changed the type of media in a tray or the type or size in theMulti-sheet Bypass Feeder, use the control panel to select themedia type and size: For the A4/Letter tray, see page 19; for A3/Ledger tray, seepage 26; or for the 2,000-Sheet Feeder, see page 30. For the Multi-sheet Bypass Feeder, see page 35.(Trays 1, 2, and 3 have paper size sensors, so you don’t need tospecify the paper size.)For the Windows 95/98/Me (PS/PCL5e) operating system:1. In your application, select File and then Print.2. Select the Xerox Phaser 5400 laser printer driver.3. Open the Properties dialog box.4. Select the Paper/Output tab.5. Click the Select Paper button.6. From the Select Paper dialog box, select the Document Body tab.7. From the drop-down list under Media Type, select theTransparency.8. Click the OK button to save the media selections.9. Click the OK button to save the properties.10. Send the job to the printer. |
Related manuals for Xerox 5400DT - Phaser B/W Laser Printer
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine