Xerox PHASER 5400 User Manual
Also see for 5400DT - Phaser B/W Laser Printer: Technical instructions
                                                                                                                           | |
Contents
| 
User Guide 47Printing JobsPrinting two-sided (duplex) jobsWith the optional Duplex Module installed, you can print two-sided(duplex) jobs.Use only the paper sizes listed in the table on page 12. Do not useenvelopes, postcards, transparencies, or label paper for duplex jobs.Use paper with a weight of 60-105 g/m 2 (16-28 lbs. bond).Refer to pages 15 through 34 for the proper orientation of drilled paperand letterhead when printing duplex.For the Windows 95/98/Me (PS/PCL5e/PCL6), Windows NT (PCL6), andWindows 2000 (PCL6) operating systems:1. In your application, select File and then Print.2. Select the Xerox Phaser 5400 laser printer driver.3. Open the Properties dialog box.4. Select the Paper/Output tab.5. Select the type of Duplex from the pull-down menu: Long edge binding Short edge bindingYou must have configured the printer (on the PrinterConfiguration tab) to include the Duplex Module.6. Click the OK button to save the properties.7. Send the job to the printer.For the Windows 2000 and Windows NT (PS/PCL5e) operating systems:1. In your application, select File and then Print.2. Select the Xerox Phaser 5400 laser printer driver.3. Open the Properties dialog box.4. Select the Layout tab.5. Select either Flip on Long Edge or Flip on Short Edge.6. Click the OK button to save the properties.7. Send the job to the printer. |
Related manuals for Xerox 5400DT - Phaser B/W Laser Printer
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine