Xerox PHASER Phaser 4400 Paper Manual

Also see for 4400N - Phaser B/W Laser Printer: Specification sheet Setup guide Troubleshooting guide

Specialty PrintingPhaser™ 4400 Laser Printer 25TransparenciesTransparencies can be printed from Tray 1, 2, or 3 or the Multi-Purpose Tray. Handle transparencies bythe edges and with both hands to avoid fingerprints and creases, which can cause poor print quality.Guidelines for printing on transparencies Use Xerox transparencies; for more information, refer to the Supported Papers section of theTrays and Paper Guide on the Interactive Documentation CD-ROM. Print only single-sided.Printing transparencies from Tray 1, 2, or 31. Insert the transparencies into the tray. For more information, refer to the Trays section of theTrays and Paper Guide on the Interactive Documentation CD-ROM. Don’t load transparencies above the indicated mark on the tray.2. When the front panel prompts you to set the paper type, press the Down Arrow key to scroll toTransparency and press the OK key to save your selection.3. In the printer driver, select Tray 1, 2, or 3 (the tray you just loaded) as the paper source and selectTransparency as the paper type.Videos are available with instructions for loading transparencies. Videos are located on theInteractive Documentation CD-ROM and on the Xerox web site at:www.xerox.com/officeprinting/4400supportP4400-81