Specialty PrintingPhaser™ 4400 Laser Printer 31LabelsLabels can be printed from Tray 1, 2, or 3 and the Multi-Purpose Tray. Refer to the Supplies section ofthe Support Guide on the Interactive Documentation CD-ROM for information on part numbers forordering these items. To order supplies and accessories, contact your local reseller or visit the Xeroxweb site at: www.xerox.com/officeprinting/4400supplies.Guidelines for printing labels If any of the labels on a sheet are missing, do not use that sheet; it may damage printercomponents. Keep labels in a cool, dry place. Labels stored in a high-humidity environment can jam in theprinter. Store unused sheets of labels flat in their containers. Rotate stock frequently. Long periods of storage can cause the labels to curl and jam theprinter. Print only on one side of the sheet of labels.Printing labels from Tray 1, 2, or 31. If your application has a setting for labels, use it as a template.2. Insert the sheets of labels into the tray. For more information, refer to the Trays section of theTrays and Paper Guide on the Interactive Documentation CD-ROM. Place the side to be printed facedown. The bottom of the sheet should enter the printer first.3. When the front panel prompts you to set the paper type, scroll to Labels and press the OK key tosave your selection.4. In the printer driver, select Tray 1, 2, or 3 (the tray you just loaded) as the paper source and selectLabels as the paper type.P4400-831 2 3