User Guide 15FeaturesEnergy saverAfter a predefined period of time since its last activity, the Phaser 7700printer enters E NERGY S TAR® standby mode. In this mode, the printersystems are shut down. When a print job is sent to the printer, it willwake up the printer. You can also wake the printer by pressing the OKkey on the front panel.You may find that the printer is going into ENERGY S TAR standby modetoo often and you do not want to wait for your print jobs while theprinter is waking up. If you want to extend the length of time beforethe printer goes into E NERGY S TAR mode, use the following procedure:1. With Menus highlighted, press the OK key.2. Scroll to Printer Setup Menu by pressing the Up or Down Arrowkey.3. Press the OK key.4. Scroll to Set Energy Star Timeout by pressing the Up or DownArrow key.5. Press the OK key.6. Increase the amount of time the printer can be idle before goinginto E NERGY S TAR mode by pressing the Up Arrow key.7. Press the OK key.
