4.1 < Network setup(Phaser 3125/N only)>4 Network setup(Phaser 3125/Nonly)This chapter gives you basic information for setting up your printer fornetwork connections.This chapter includes:• Introduction• Supported operating systemsIntroductionOnce you have connected your printer to a network with an RJ-45Ethernet cable, you can share the printer with other network users.You need to set up the network protocols on the printer to use it as yournetwork printer.Supported operating systemsThe following table shows the network environments supported by theprinter:• TCP/IP: Transmission Control Protocol/Internet Protocol• DHCP: Dynamic Host Configuration Protocol• BOOTP: Bootstrap ProtocolItem RequirementsNetwork interface • 10/100 Base-TXNetwork operatingsystem• Windows 98/Me/NT 4.0/2000/XP(32/64 bit)/2003• Linux OS including Red Hat 8 ~ 9,Fedora Core 1 ~ 3, Mandrake 9.2 ~ 10.1,SuSE 8.2 ~ 9.2• Mac OS 8.6 ~ 9.2, 10.1 ~ 10.4• Unix HP-UX, Solaris, SunOS, SCO UNIXNetwork protocols • TCP/IP• EtherTalk• HTTP 1.1• SNMPv2Dynamicaddressing server• DHCP, BOOTP
