5.6 < Loading print media>1 Load the paper in the manual tray with the side to be printed onfacing up.2 Adjust the manual tray paper width guides to the width of the paper.Do not force too much, or the paper will bend, which could result ina paper jam or skew.3 When you print a document, set the paper source to ManualFeeder and select the appropriate paper size and type in thesoftware application. See the Software Section.4 Print a document.5 Press the Cancel button.The printer picks up the print media and prints.6 Insert the next sheet into the manual tray and press the Cancelbutton.Repeat this step for every page to be printed.Note• If you do not press the Cancel button, after a pause the printerwill automatically pick the print media.Knowing an output locationThe output tray collects paper face down, in the order in which the sheetswere printed.Note• If you continuously print many pages, the surface of the outputtray may become hot. Be careful not to touch the surface, andespecially keep children away from the surface.• The output tray can hold up to 100 sheets of 75 g/m 2 (20 lb)plain paper. Remove the pages so that the tray is notoverloaded.11 output tray
