Xerox Phaser 3320DN System Administrator Manual

Also see for Phaser 3320DN: User guide

Contents

Windows - Installing DriverXerox Phaser 3320DN/3320DNISystem Administrator Guide40If the Printer Driver does not WorkIf the printer driver does not work properly, uninstall the driver and reinstall it.For windows follow the steps below to uninstall the driver.1. Make sure that the machine is connected to your computer and powered on.2. From the Start menu, select Programs or All Programs > Xerox Printers > your printer drivername > Maintenance.3. Select Remove and select Next.You will see a component list so that you can remove any item individually.4. Select the components you want to remove and then select Next.5. When your computer asks you to confirm your selection, select Yes.The selected driver and all of its components are removed from your computer.6. After the software is removed, select Finish.If you want to reinstall the driver over the currently installed driver via the provided Software andDocumentation CD, insert the CD; the window with an overwriting confirmation message appears.Simply confirm it to proceed to the next step. Next steps are the same as the first installation you havemade.Wireless Setup (Phaser 3320DNI)Note The machine will not connect to the wireless network while the network cable is attached.1. Ensure your printer is powered on.2. Insert the supplied Software and Documentation CD into your CD-ROM drive.The CD should run automatically and the installation window appear.• If the installation window does not appear, select the Start button and then Run. TypeX:\Setup.exe, replacing “X” with the letter which represents your drive and select OK.• If you use Windows Vista, select Start > All programs > Accessories > Run, and typeX:\Setup.exe. If the AutoPlay window appears in Windows Vista, select Run Setup.exe in theInstall or run program field, and select Continue in the User Account Control window.3. Select Install Software.4. Select Wireless Setup and follow the wizard instruction to select and install the printer.If your printer is not already connected to the computer, the Connect Device screen will appear.After connecting the printer, select Next and follow the wizard instruction to install the printer.5. After the installation is finished, select Finish. If your printer is connected to the network, a TestPrint page will be printed.