Xerox Phaser 3428 User Manual
                                                                                         | |
Contents
| 
Using Your Printer with a Macintosh (Phaser 3428/DN only)258 Using Your Printer with aMacintosh(Phaser 3428/DN only)Your printer supports Macintosh systems with a built-in USBinterface or 10/100 Base-TX network interface card. When youprint a file from a Macintosh computer, you can use the driver byinstalling the PPD file.NOTE: Some printers do not support a networkinterface. Make sure that your printer supports anetwork interface by referring to Printer Specificationsin your Printer User’s Guide.This chapter includes:• Installing printer driver for Macintosh• Setting Up the Printer• PrintingInstalling printer driver forMacintoshThe PostScript driver CD-ROM that came with your machineprovides you with the PPD file to use the PS driver, AppleLaserWriter driver, for printing on a Macintosh computer.Also, it provides you with the Twain driver for scanning on aMacintosh computer.1 Connect your machine to the computer using the USBcable or the Ethernet cable.2 Turn on your computer and the machine.3 Insert the PostScript driver CD-ROM which came with yourmachine into the CD-ROM drive.4 Double-click CD-ROM icon that appears on yourMacintosh desktop.5 Double-click the MAC_Installer folder.6 Double-click the MAC_Printer folder.7 For Mac OS 8.6~9.2, double-click the Xerox Phaser3428_Classic icon.For Mac OS 10.1~10.4, double-click the Xerox Phaser3428_OSX icon.8 Click Continue.9 Click Install.10 After the installation is finished, click Quit.Setting Up the PrinterSet up for your printer will be different depending on whichcable you use to connect the printer to your computer—thenetwork cable or the USB cable.For a Network-connected MacintoshNOTE: Some printers do not support a network interface.Before connecting your printer, make sure that yourprinter supports a network interface by referring to PrinterSpecifications in your Printer User’s Guide.1 Follow the instructions on “Installing printer driver forMacintosh” on page 25 to install the PPD file on yourcomputer.2 Open Print Center or Printer Setup Utility from theUtilities folder.3 Click Add on the Printer List.4 Select the AppleTalk tab.The name of your machine appears on the list. SelectXRX000xxxxxxxxx from the printer box, where thexxxxxxxxx varies depending on your machine.5 Click Add.6 If Auto Select does not work properly, select Xerox inPrinter Model and your printer name in Model Name.Your machine appears on the Printer List and is set as thedefault printer.For a USB-connected Macintosh1 Follow the instructions on “Installing printer driver forMacintosh” on page 25 to install the PPD file on yourcomputer.2 Open Print Center or Printer Setup Utility from theUtilities folder.3 Click Add on the Printer List.4 Select the USB tab.5 Select your printer name and click Add.6 If Auto Select does not work properly, select Xerox inPrinter Model and your printer name in Model Name.Your machine appears on the Printer List and is set as thedefault printer. |
Related manuals for Xerox Phaser 3428
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine