Xerox Phaser 3600 User Manual

Also see for Phaser 3600: Features Options guide Installation guide Letter of volatility Quick use guide

Contents

2.1 <System setup>2 System setupThis chapter provides step by step information on setting up your printer.This chapter includes:• Using control panel menus• Menu overview• Printing a demo page• Changing the display languageUsing control panel menusA number of menus are available to make it easy for you to change theprinter settings. The diagram on the next column shows the menus andall of the menu items available in each menu. The items in each menuand the options you can select are described in more detail in the tablesbeginning on page 2.2.Accessing control panel menusYou can control your printer from the printer’s control panel. You canalso set the control panel menus while the printer is in use.1 Press Menu until the menu you want appears on the bottom line ofthe display and press OK.2 Press the Up/down arrow buttons until the desired menu itemappears and press OK.3 If the menu item has sub menus, repeat step 2.4 Press the Up/down arrow buttons to access the desired settingoption or the required value.5 Press OK to save your selection.An asterisk (*) appears next to the selection on the display,indicating that it is now the default.6 Press Start/Stop to return to Standby mode.After 30 seconds of inactivity (no key being pressed), the printerautomatically returns to Standby mode.NotePrint settings made from the printer driver on a connectedcomputer override the settings on the control panel.NoteSome menus may not appear in the display depending onoptions or models. If so, it is not applicable to your machine.Menu overviewThe control panel menus are used to configure the printer. The controlpanel provides access to the following menus:a. Available when the installed memory is larger than 128 MB.b. Available when duplex unit is installed.c. Available when optional tray 3 is installed.Information(See page 2.2.)Menu MapConfiguratonDemo PagePCL Font ListPS3 Font ListaFlashDirectoryEPSON FontLayout(See page 2.2.)OrientationSimplex MarginDuplexbDuplex MarginbImage AdjustEmulation(See page 2.7.)Emulation TypeSetupHex ModePaper(See page 2.4.)CopiesTray 1MPT SizeTray 1MPT TypeTray 2 TypeTray 3 TypecPaper SourceBypass MP TrayTray ChainingSystem Setup(See page 2.5.)LanguagePower SaveAuto ContinueAltitude Adj.Auto CRCollationaSmartDuplexingbJob TimeoutJob Held TimeraMaintenanceParallel SetupUSB SetupPanel LockoutSecure PrintLow TonerCm or inchesClear SettingGraphic(See page 2.5.)ResolutionDarknessNetworka(See page 2.8.)TCP/IPEtherTalkNetWareEthernet SpeedClear SettingNetwork Info.802.1xPort 9100LPRIPPSLPCentreWare ISSNMPSecure Printa(See page 2.2.)ReleaseaDeletea