FeaturesXerox ® Phaser® 6022 Printer 23User GuidePower Saver ModeYou can set the time the printer spends idle in ready mode before the printer transitions to a lowerpower level.There are two levels of Power Saver mode.• Mode 1 (Low Power): The printer shifts from Ready mode to Low Power mode to reduce standbypower consumption.• Mode 2 (Sleep): The printer shifts from Low Power mode to Sleep mode for a greater reduction inpower consumption.Changing Power Saver Mode Settings Using the Control PanelTo change the Power Saver mode settings:1. At the printer control panel, press the Menu button.2. Use the Up and Down arrows to navigate to Admin Menu, then press OK.3. Navigate to System Setup, then press OK.4. Navigate to PowerSaver Time Mode 1 - Low Power or PowerSaver Time Mode 2 - Sleep, thenpress OK.5. To increase or decrease the number of minutes before the printer enters Power Saver mode, pressthe Up or Down arrow buttons, then press OK.Exiting Power Saver ModeThe printer exits Power Saver mode automatically when it receives data from a connected device.To exit Power Saver mode manually, on the control panel, press the Power Saver button.
