10.1 < Troubleshooting>10 TroubleshootingThis chapter gives helpful information for what to do if you encounter anerror.This chapter includes:• Tips for avoiding paper jams• Clearing paper jams• Understanding display messages• Solving other problemsTips for avoiding paper jamsBy selecting the correct media types, most paper jams can be avoided.Follow the procedures on page 4.5. Ensure that the adjustable guidesare positioned correctly.• Do not overload the tray. Ensure that the paper level is under thebrackets of the tray.• Do not remove paper from the tray while your machine is printing.• Flex, fan, and straighten paper before loading.• Do not use creased, damp, or highly curled paper.• Do not mix paper types in a tray.• Use only recommended print media. See page 4.2 .Ensure that the recommended print side of print media is facing up in themanual tray and tray.Clearing paper jamsWhen a paper jam occurs, paper jam messages appear on the display.Refer to the table below to locate and clear the paper jam.Message Location of jam Go toPaper Jam 0Open/Close Door In the paper feed area page 10.1Paper Jam 1Open/Close DoorIn the fuser area or aroundthe rear cover page 10.3Scan Unit Openor Paper Jam2 In the paper exit area page 10.2Manual FeederPaper Jam 0 In the paper feed area page 10.2CautionTo avoid tearing the paper, pull out the jammed paper gently andslowly. Follow the instructions in the following sections to clearthe jam.In the tray1 Open and close the front cover. The jammed paper is automaticallyejected from the machine.If the paper does not exit, go to the next step.2 Pull the tray out of the machine.3 Remove the jammed paper by gently pulling it straight out.If the paper does not move when you pull, or if you do not see thepaper in this area, check the paper exit area. See page 10.2.4 Insert the tray into the machine until it snaps into place.5 Open and close the front cover. Printing automatically resumes.
