Xerox Phaser 6130 User Manual

Also see for PHASER 6130: Instruction sheet Instruction sheet Installation & operation Instruction sheet Instruction sheet

Contents

Xerox Phaser 6130 User Manual Manual pdf 76 page image

Printing Custom SizePhaser® 6130 Printer4-326. To assign a paper name, select the Name Paper Size check box, and then enter the namein Paper Name. Up to 14 characters can be used for the paper name.7. If necessary, repeat steps 4 to 6 to define another custom size.8. Click OK twice.Using the PostScript DriverOn the PostScript print driver, set the custom size in the Custom Paper Size dialog box. Thissection explains the procedure using Windows XP as an example.1. From the Start menu, select Settings, click Printers and Faxes, and then display theproperties of the printer to be used.2. Select the General tab.3. Click the Printing Preferences button.4. From Paper Size, select Custom Paper Size.5. Specify the length of the short edge and long edge under Setting For. You can specify thevalues either by entering them directly or using the Up Arrow and Down Arrow buttons.The length of the short edge cannot be longer than the long edge, even if it is within thespecified range. The length of the long edge cannot be shorter than the short edge, even ifit is within the specified range.6. Click OK.Printing on Custom Size PaperUse the following procedures to print using either the PCL or PostScript drivers.Using the PCL DriverThe procedure to print on custom size paper using the PCL print driver is as follows.Note: The way to display the printer Properties dialog box differs according to theapplication software. Refer to the manual of your respective application software.1. From the File menu, select Print.2. Select this printer as the printer to be used and click Preferences.3. Select the Paper/Output tab.4. Select the appropriate paper tray from Paper Tray.5. Select the appropriate paper type from Paper Type.6. From Paper Size, select the size of the original document.7. Click the Layout tab.8. From Output Size, Fit to New Paper Size defaults to Same As Paper Size.9. Click OK.10. Click Print in the Print dialog box to start printing.