Control Panel MenusPhaser® 6130 Printer5-3Changing Menu SettingsChanging the Power Saver TimeIn this example, you set the transitional time to the Power Saver Mode.1. To display the menu screen, press the Menu button at the print screen.2. Press the Up Arrow or Down Arrow button until Admin Menu is displayed, and thenpress the Forward Arrow or OK button.3. Press the Up Arrow or Down Arrow button until System Setup is displayed, and thenpress the Forward Arrow or OK button.4. Press the Up Arrow or Down Arrow button until PowerSaver Time is displayed, andthen press the Forward Arrow or OK button.5. Press the Up Arrow or Down Arrow button to change the number of minutes that theprinter will wait before entering Power Saver mode.6. Press the OK button to confirm your settings. The settings that have been confirmed aredisplayed with the affix “*”.7. Press the Menu button to quit the menu operation and return to the print screen.8. Ready to print.Note: If you want to change values after you have confirmed them by pressing the OK button,you need to set them from the start again.Initializing Configured ValuesDisplay the item you want to initialize, and then press both the Up Arrow and Down Arrowbuttons at the same time.Once the change process is completed, the factory defaults will be displayed. Press theOK button to confirm the value.
