Description of Menu ItemsPhaser® 6280 Printer103PostScript SetupSpecifies the PostScript settings.Image Enhance Selects whether to perform image enhancement.Image enhancement is a feature that makes the boundary line between black andwhite smoother to decrease jags and enhance the visual appearance. The default isOn.Hex Dump Specifies whether to print the data sent from a computer in the ASCII codecorresponding to the hexadecimal notation format in order to check the datacontents. The default is Disable.Draft Mode Specifies whether to print in draft mode. The default is Disable.Line Termination Sets the line termination.• Off (default)The line termination command is not added.CR=CR, LF=LF, FF=FF• Add-LFThe LF command is added.CR=CR-LF, LF=LF, FF=FF• Add-CRThe CR command is added.CR=CR, LF=CR-LF, FF=CR-FF• CR-XXThe CR and LF commands are added.CR=CR-LF, LF=CR-LF, FF=CR-FFDefault Color Specifies the color mode to Color or Black. This settings is used when the color printingmode setting is not specified for the print job that is sent to the printer.• Black (default)Prints in black and white mode.• ColorPrints is the color mode.Item DescriptionPS Error Report Turns error reporting on or off.PS Job Time-Out Turns the time-out off, or selects the length of time before timing-out.Init PS Disk Initializes the HDD area that PostScript uses.Paper Select Mode Selects a paper tray.Default Color Sets the default as Color or Black.Item Description
