Printing on Specialty MediaPhaser® 6280 Printer68Loading TransparenciesNote: Transparencies with a white frame and full-color transparencies cannot be used.1. After carefully fanning a small stack of transparencies, load them into Tray 1 (MPT)with the side to be printed facing down. Load no more than 25 transparencies at atime.2. Slide the paper guides to the size of the transparencies.3. Pull out the output tray extension when loading paper, such as transparencies.Printing on TransparenciesWhen MPT Mode is set to Panel Specified, you need to set the paper type and size settingsfor the tray on the control panel in advance. See Setting Paper Types and Sizes on page 50.Printing transparencies continuously may lead to the output transparencies sticking toeach other. Remove the transparencies from the output tray after about 20 sheets, andthen fan them to lower their temperatures.Using the PostScript DriverTo print on transparencies using the PostScript print driver, display the Paper/Output tab.1. From the File menu, select Print.2. Select this printer as the printer to be used and click Preferences or Properties.3. Select the Paper/Output tab.4. From Paper Type, select Transparency.5. From Paper Tray, select Tray 1 (MPT).6280-011
