Setting Paper Types and SizesPhaser® 6280 Printer50Setting Paper Types and SizesSetting Paper TraysWhen loading paper in Tray 3 or the 550-Sheet Feeder (optional), it is necessary to set thepaper type on the control panel.When loading paper in Tray 1 (MPT), set the paper size and type on the control panel whenprinting. When MPT Mode has been set to Panel Specified (default) on the control panel,you can set the paper size and type on the control panel.This section describes how to set the paper size and type on the control panel.Note: When you set MPT Mode to Panel Specified, printing will be performed only whenthe settings for the paper size and type configured on the print driver match the settingson the control panel. When the settings on the print driver and control panel do not match,follow the instructions displayed on the control panel.You can also display the message to set the paper size and type on the control panel everytime you load paper into each tray.See also:Description of Menu Items on page 93Setting Paper TypesCaution: Paper type settings must match those of the actual paper loaded in the trays.Otherwise, print-quality problems can occur.1. Press the Menu button to display the Menu screen.2. Select Tray Settings, and then press the OK button.3. Select the tray, and then press the OK button.4. Select Paper Type, and then press the OK button.5. Select the correct paper type for the loaded paper, and then press the OK button.6. Press the Menu button.Downloaded From ManualsPrinter.com Manuals
