Description of Menu ItemsPhaser® 6280 Printer98USB SetupUse USB Setup for setting the USB port’s status.System SetupSystem Setup menu is used to make the printer operation settings, such as for alarm andpower saver mode.Item DescriptionPort Status Select either Enable or Disable.Adobe Protocol Specifies the PostScript communication protocol: Standard,BCP, TBCP, Binary, or Auto.Item DescriptionPowerSaver Timer Specify the transitional time to Power Saver between 5 and 60 minutes in incrementsof 1 minute.• 5 min. to 60 min. (default: 30 min.)• For details, refer to Power Saver Mode on page 27Audio Tones Specifies whether to turn on the alarm when an error occurs in the printer. You cannotadjust the sound volume.• Control Panel (default: Off)• Invalid Key (default: Off)• Machine Ready (default: Off)• Job Complete (default: Off)• Fault Tone (default: Off)• Alert Tone (default: Off)• Out of Paper (default: Off)• Low Toner Alert (default: Off)• Base Tone (default: Off)Fault Time-Out Sets the fault time-out function.Time-Out You can cancel a printing process when it goes beyond a set time period. Set the timeuntil the print job is canceled. When this timeout expires, the print job is canceled.• 5 sec. to 300 sec. (default: 30 sec.)Specifies the amount of time in increments of 1 second the printer waits foradditional data before it cancels the job.• OffCannot cancel.Downloaded From ManualsPrinter.com Manuals
