Xerox Phaser 6300, 6350, 8500, 8550 Administrator's Manual

Also see for Phaser 6300: Supplementary guide Instruction sheet Repacking guide Administrator's guide Specifications

Contents

Xerox Phaser 6300, 6350, 8500, 8550 Administrator's Manual Manual pdf 44 page image

Configuring SNMPSystem Administrator Guide4-15Configuring SNMP v1/v2cConfiguring SNMP v1/v2c Community NamesTo configure SNMP v1v2c community names:1. Launch your web browser.2. Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).3. Click Properties.4. Select the Protocols folder on the left sidebar.5. Select SNMP.6. If prompted, enter your Admin or Key User name and password.7. On the SNMP Configuration page, click the Configure SNMP v1/v2c button.8. To set community names for GET/SET SNMP queries and traps, enter information (up to32 alphanumeric characters) in one or more of the following fields:Note: These names are not displayed on this page, but are shown as a row of asterisks (*).■ GET Community Name: Allows a host to perform SNMP GETS on the printer usingthis community name.■ SET Community Name: Allows a host to perform SNMP SETS on the printer usingthis community name.■ Trap Community Name: Allows a host to receive traps from the printer using thiscommunity name.Note: Hosts must have these community names configured in their applications to accessthe printer using SNMP v1/v2c.9. Click the Apply button to save the changes.10. If prompted, enter your Admin or Key User name and password.Adding or Editing Traps for SNMP v1/v2cTo add or edit traps for SNMP v1v2c:1. On the SNMP Configuration: Configure SNMP v1v2c page, click the Configure Trapsbutton.The SNMP Configuration: Configure Traps page lists the current Trap DestinationAddresses for the SNMP protocol.■ The Address column lists the Trap Destination IP address or DNS Name.■ The Version/Type column lists the SNMP Trap version or Inform Request for sendingto the specified trap address. SNMP Trap versions include SNMP v1 Traps, SNMPv2c Traps, and SNMP v2c Inform Requests.■ The Traps column lists the types of traps to send to the Trap Destination Address.Traps to be received include Printer Traps, Job Monitoring Traps, Cold Start, andAuthentication Traps.