Xerox Phaser 6300, 6350, 8500, 8550 Administrator's Manual

Also see for Phaser 6300: Supplementary guide Instruction sheet Repacking guide Administrator's guide Specifications

Contents

Xerox Phaser 6300, 6350, 8500, 8550 Administrator's Manual Manual pdf 54 page image

Paper Tips PageSystem Administrator Guide5-6Using the Control PanelTo configure the jam recovery setting:1. On the control panel, select Paper Tray Setup, and then press the OK button.2. Select Paper Handling Setup, and then press the OK button.Note: If Paper Handling Setup is locked on the control panel, use CentreWare IS toselect the jam recovery setting.3. Select Reprint Jammed Pages, and then press the OK button.4. Select On or Off, and then press the OK button.Using CentreWare ISTo configure the jam recovery setting:1. Launch your web browser.2. Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).3. Click Properties.4. Select the Security folder on the left sidebar.5. Select Printing Security Settings.6. If prompted, enter your Admin or Key User name and password.7. Under Jam Recovery Options, select one of the following options:■ Reprint the jammed page and continue printing the rest of the job: After the jamis cleared, the printer begins printing the job from the point where the media jammed,including the jammed page, through the end of the job.■ Do not reprint the jammed page, but do continue printing the rest of the job:After the jam is cleared, the printer begins printing the job from the point where themedia jammed, excluding the jammed page, through the end of the job.8. Click the Save Changes button.9. If prompted, enter your Admin or Key User name and password.Paper Tips PageFor information on the supported media types and corresponding trays, print the Paper Tipspage:1. On the control panel, select Information, and then press the OK button.2. Select Information Pages, and then press the OK button.3. Select Paper Tips Page, and then press the OK button.