Solving Print-Quality ProblemsPhaser® 7400 Color Printer4-15Fusing Is Incomplete or Toner Is FlakingProblemToner appears to be pulled off the print, or is easy to rub off.Solution■ Verify that the paper you are using is the correct type for the printer. SeeSupported Paper and Media on page 3-3.■ Verify that the paper is properly loaded in the tray, and the correct paper type is selected inthe Paper Tray Setup menu. See Loading Paper on page 3-8.If the problem persists:1. On the control panel, select Paper Tray Setup, and then press the OK button.2. Select the tray you are using, and then press the OK button.3. Select Change Setup, and then press the OK button.4. Select Special as the paper type, and then press the OK button.5. Select Continue, and then press the OK button.6. Select a paper type that is heavier than the current tray setting, and then press theOK button.Note: Special paper types from lightest to heaviest are: Light Paper, Medium Light Paper,Medium Paper, Medium Heavy Paper, Heavy Paper, Thin Card Stock, Thick Card Stock,Extra Thick Card Stock.7. If prompted, select the appropriate paper size, and then press the OK button.7400-211
