4-6 Phaser 8400/8500/8550 Color PrinterService Diagnostics Menu MapMenu MapMenu DescriptionMain Menu Displays general help text describing the general operation of theControl Panel/menu system.Development Menu A temporary submenu containing some development functionsand access to tests still under development.Return to CustomerModeExits service diagnostics and runs through POST to Ready.Check Menu Check AllActivators MenuShafts MenuFans MenuHeaters MenuPaper Path MenuDrive MenuDrum Menu (8500)Motors MenuMisc. MenuSee the individual table descriptionsstarting on page 4-12 for all Check/Activator menu items.Monitor MenuA submenu containing a set of functions for passively viewing or monitoring printermechanical measurements.Sensors Monitors all mechanically activateddigital sensors except for the ControlPanel buttons. Whenever a statechange is detected it is reported on theControl Panel.Encoders Monitors each of the non-temperatureanalog sensors (Tray 1 width, Y, MediaPath, and Process motor encoders).Temps Monitors each of the thermal sensors.Shows the current thermal control loopsetpoint (first value) and the currentsensor temperature (second value).Heaters Monitors each of the heaters. Shows ifthe heater is currently enabled (firstvalue) and what percentage ofmaximum power is currently allocated(second value).Line Voltage Monitors line voltage as seen by thepower supply. Reports max and minvalues.
