Calibrating the ScannerPhaser® 8510/8560MFP Multifunction Product5-35Calibrating the ScannerThis section includes:■ Starting the Calibration Procedure on page 5-35■ Calibrating the Scanner at the Document Glass on page 5-36■ Calibrating the Scanner at the Document Feeder on page 5-37Perform the scanner calibration procedure if your scanner, document feeder, or documentcover is replaced. Scanner calibration adjusts the output quality of the front and back pages of2-sided originals in relation to each other. This procedure should not be performed as partof normal system operation.Starting the Calibration Procedure1. On the control panel, press the System button.2. Select Information, and then press the OK button.3. Select Troubleshooting, and then press the OK button.4. Select Service Tools, and then press the OK button.5. Select Calibrate Scanner, and then press the OK button. Continue with the DocumentGlass steps.Calibrate the scanner using the Scanner Calibration pagethat came with your replacement scanner, document feeder,or document cover. After you begin the calibrationprocedure at the control panel, calibrate the scanner using atwo-step process:■ The first step scans the calibration page from thedocument glass. Follow the steps in the DocumentGlass section. (For systems without a document feeder,only use the steps in this section to calibrate thescanner.)■ The second step scans the calibration page through thedocument feeder. Follow the steps in the DocumentFeeder section.
