Adding Individual and Group Speed Dial EntriesPhaser® 8510/8560MFP Multifunction Product6-8Adding a GroupSet up and save group names to easily access them when you want to send a fax to a group.Groups can include both individual and group entries once they have been set up.Note: Individual entries must be set up before groups can be defined.Using the Control PanelUse the control panel to add or remove individuals or groups from the speed dial group.Setting Up a GroupTo set up a group:1. On the control panel, press the Speed Dial button.2. Select Group, and then press the OK button.3. Select a blank number in the list displayed, and then press the OK button.4. Using the alphanumeric keypad, enter a group name, and then press the OK button.5. To add individuals to this group:a. Select Add Individual, and then press the OK button. This option appears when oneor more individuals can be added to this group.b. Select an individual from the list displayed, and then press the OK button.c. Repeat the above steps to continue adding individuals to the group.6. To add a group to this group:a. Select Add Group, and then press the OK button. This option appears when one ormore groups can be added to this group.b. Select a group from the list displayed, and then press the OK button.c. Repeat the above steps to continue adding groups to the group.7. When you have finished adding individuals and other groups, select Done, and then pressthe OK button.
