Xerox Phaser 860 Advanced Features And Troubleshooting Manual

Also see for Phaser 860: Installation guide Supplementary guide Supplementary guide Networking Setup Guide Brochure & specs

Contents

Xerox Phaser 860 Advanced Features And Troubleshooting Manual Manual pdf 15 page image

Advanced Features and Troubleshooting Manual 9Advanced FeaturesNegative and mirror imagesYou can print your pages as a negative image (reverses the light and dark areas in yourprinted image) and/or mirror image (flips images horizontally on pages when printed).You can select negative or mirror images in a supported driver: Windows 95 / Windows 98 PostScript driver:On the Setup tab, click the More Layout Options button, then click the Print as aNegative Image and/or Print as a Mirror Image checkbox in the More Layout Optionsdialog box. Windows 2000 driver:From the Layout tab or Paper/Quality tab, click the Advanced button. In the dialogbox under Document Options and PostScript Options, select either Yes or No forMirrored Output and Negative Output. Windows NT driver:On the Advanced tab under Document Options and PostScript Options, select eitherYes or No for Mirrored Output. LaserWriter 8.6 or 8.7 driver:From the File menu, select Page Setup, choose PostScript Options from thepull-down menu, and then select Invert Image (to print a negative image) or FlipHorizontal (to print a mirror image).ScalingYou can reduce or enlarge your page images when they are printed. You select a scalingvalue between 25 and 400 percent. The default is 100 percent.You can scale the pages by using the supported driver: Windows 95 / Windows 98 PostScript driver:On the Setup tab, click the More Layout Options button, then specify the percentageto scale in the More Layout Options dialog box. Windows 2000 driver:From the Layout tab or Paper/Quality tab, click the Advanced button. In the dialogbox under Graphic, select the desired percentage for Scaling. Windows NT driver:On the Advanced tab under Graphic, select the desired percentage for Scaling. LaserWriter 8.6 or 8.7 driver:From the File menu, select Page Setup and then specify the percentage in the boxafter Scale.