Xerox Phaser 860 Advanced Features And Troubleshooting Manual

Also see for Phaser 860: Installation guide Supplementary guide Supplementary guide Networking Setup Guide Brochure & specs

Contents

Xerox Phaser 860 Advanced Features And Troubleshooting Manual Manual pdf 39 page image

Advanced Features and Troubleshooting Manual 33Printer Management PC: SYSTART.PS — Turns on automatic execution of the SysStart job NOSYSTRT.PS — Turns off automatic execution of the SysStart jobRefer to page 40 for downloading instructions.To make the change take affect, reset the printer.Manual feed timeoutWhen you select Manual Feed-Paper or Manual Feed-Transparency in the printer driver,the front panel prompts you to add the sheet of paper or transparency. If you don’t insertanything in the manual-feed slot, the printer waits for a specified time before attempting topick paper from one of the paper trays.To change the manual feed timeout from the printer’s front panel:1. With Menus highlighted, press the OK key.2. Scroll to Printer Setup Menu by pressing the Scroll Up or Scroll Down key.3. Press the OK key.4. Scroll to Set Manual Feed Timeout.5. Press the OK key.6. Scroll until the desired number of seconds (0 to 999) is displayed. (If you select avalue of 0, the printer does not time out while waiting for paper to be inserted.)7. Press the OK key.To change the manual feed timeout using CentreWare IS Printer Management software:1. From your printer’s Internet Services home page, click Properties.2. On the left side of the Properties page in CentreWare IS, click Printer Defaults.3. If desired, change the setting for Manual Feed Timeout (under Timeout Settings onthe Printer Defaults page). (Select a number from 0 to 65535 seconds; if you select avalue of 0, the printer does not time out while waiting for paper to be inserted.)4. Click the Save Changes button on the bottom of the page.Front panel intensityTo make the front panel text more readable, you can adjust the intensity of the frontpanel’s back lighting:1. On the front panel, with Menus highlighted, press the OK key.2. Scroll to Printer Setup Menu by pressing the Scroll Up or Scroll Down key.3. Press the OK key.4. Scroll to Set Front Panel Intensity.5. Press the OK key.6. Scroll until the desired back light intensity is displayed. The intensity values rangefrom 0 (no back light) to 10 (brightest back light).