Xerox Phaser 860 Advanced Features And Troubleshooting Manual

Also see for Phaser 860: Installation guide Supplementary guide Supplementary guide Networking Setup Guide Brochure & specs

Contents

Xerox Phaser 860 Advanced Features And Troubleshooting Manual Manual pdf 21 page image

Advanced Features and Troubleshooting Manual 15Color and Color Sampler ChartsPANTONE ColorsPANTONE Color files for your printer include printer-specific color library files for somespecific applications and a file to print the PANTONE Color sampler chart.For the latest information on color libraries, contact your local Xerox reseller or visit theXerox web site at:www.xerox.com/officeprintingPrinting PANTONE Colors from the color selection bookIn some applications, you can select colors from the PANTONE Process Imaging Guide.These colors can be proofed on your Phaser printer before final output on a printing press.For this method, the printer-specific PANTONE Color files are not required.1. From the application, select and apply PANTONE Colors. Use the individual colorvalues from the PANTONE Process Imaging Guide.2. Print your document, selecting Commercial Press or SWOP Press for the colorcorrection in the printer driver; see page 3 for more information.3. When you are satisfied with the proof, the file can be separated for printing pressplates without adjustment to the file.Printing printer-specific PANTONE ColorsYour printer can produce process color simulations of PANTONE Spot Colors.1. Print a copy of the PANTONE Color chart; see page 16 for more information.2. Within the application, define the desired color in your document by using theindividual CMYK values that appear on the sampler chart.3. Print your document, selecting None for the color correction in the printer driver; (seepage 3 for more information). For best results, use the proper print quality setting andthe same type of paper that you used to print the PANTONE Color chart.For final output on a color printing press (colors printed as a process color, not spotcolors):1. Open the application.2. Replace the printer’s PANTONE process Colors with standard PANTONE Colors.3. Separate the file for printing press plates.