Xerox Phaser6700 System Administrator Manual

Also see for Phaser 6700: User guide Quick guide Quick use guide User guide Quick use guide

Contents

Xerox Phaser6700 System Administrator Manual Manual pdf 14 page image

Initial Setup14 Phaser 6700 Color PrinterSystem Administrator GuideInitial Setup in CentreWare Internet ServicesCentreWare Internet Services is the administration and configuration software installed on theembedded Web server in the printer. It allows you to configure and administer the printer from a Webbrowser.Before you begin: TCP/IP and HTTP must be enabled to access CentreWare Internet Services. If you disable either ofthese services, enable them at the printer before accessing CentreWare Internet Services. Locate your printer IP address using the Configuration Report.Note: If your printer is locked, type the system administrator user name and password to access theProperties tab. The administrator user name is admin and the default password is 1111.Accessing CentreWare Internet ServicesAt your computer, open a Web browser, type the IP address of the printer in the address field, then pressEnter or Return.Changing the System Administrator PasswordXerox® recommends that you change the default system administrator password after you configure theprinter. Be sure to store the password in a secure location.1. In CentreWare Internet Services, click Properties > Security.2. Click Admin Password.3. Under User Name, type the New Password.4. Retype the password to verify.5. Click Apply to save the new settings or Undo to retain the previous settings.Locking or Unlocking the Printer1. In CentreWare Internet Services, click Properties > Security.2. Click Access Rights > Tools & Feature Access.3. Under Presets, select an option: Open Access: Allow all users to access the listed tools and features on the control panel touchscreen. Restricted Access: Require users to log in as an administrator to access the listed tools andfeatures on the control panel touch screen.4. To allow a Xerox representative to access restricted settings if the printer is being serviced, selectService Access.5. Click Apply