Xerox SAFEStor User Manual
                                                                        | |
Contents
| 
SAFEStor User GuidePage 17This screen contains the following fields:Total Number of Disks The total number of disk drives that are available for theRAID Volume set.Select RAID Level Select the RAID level to be applied to the RAID Volumeset from the drop-down listMaximum Capacity Allowed The maximum capacity in Gigabytes that is available forthe creation of the RAID Volume set.Select Capacity Select the capacity that you wish to apply to the RAIDVolume set.Volume Initialization Mode Select whether you want the initialization of the VolumeSet to take place in the Foreground (fastest) or run inthe Background (slow).Select Stripe Size Select the stripe size to apply to the RAID Volume Setfrom the drop-down list.To create a Volume Set using the Quick Create function, follow the procedure below:1. Enter the information in the screen as described in the table above.2. Select the Confirm The Options check-box.3. Click Submit to create the RAID Volume Set.R A ID Set FunctionsThis section describes the RAID Set functions of the RAID Management software. Thesefunctions allow you to create, delete, modify and expand a RAID set as well as create anddelete hot spare drives and rebuild RAID sets.Create a RAID SetThis function allows you to create a new RAID Set. To create a new RAID Set, follow theprocedure below: |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine