Xerox SAFEStor User Manual
                                                                        | |
Contents
| 
SAFEStor User GuidePage 52Max Sync Rate The RAID subsystem supports 320 MB/sec as the highestdata transfer rate for the Ultra 320 SCSI system.Check Volume SetUse this option to verify the correctness of the redundant data in a volume set. Forexample, in a system with dedicated parity, volume set check means computing the parityof the data disk drives and comparing the results to the contents of the dedicated paritydisk drive.To check a Volume Set, select Check Volume Set, then press Enter. Select a Raid Setfrom the list, then press Enter to show all Volume Sets.Select the Volume Set from the list and press Enter to select it. A confirmation screen isdisplayed. Press Yes to start the check.Stop Volume Set CheckUse this option to stop all Check Volume Set requests.Display Volume Set Info.To display Volume Set information, scroll to the desired Volume Set, then press Enter.The Volume Set Information will be displayed as shown below. You can only viewinformation for one Volume Set at a time.Physical DriveChoose this option from the Main Menu to select a physical disk and perform operations(described below) on it. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine