Xerox SAFEStor User Manual
                                                                        | |
Contents
| 
SAFEStor User GuidePage 322. The following parameters can be set from this screen:DHCP Function Select whether you want to enable or disableDHCP functionality on the enclosure usingthe drop down list.Local IP Address Enter the local IP address in the boxes (ifDHCP is disabled)Gateway IP Address Enter the Gateway IP address in the boxesSubnet Mask Enter the Subnet Mask address in the boxesHTTP Port Number Enter the HTTP Port Number in the box.Telnet Port Number Enter the Telnet Port Number in the box.Current IP Address Displays the current IP address.Current Gateway IPAddressDisplays the current Gateway IP address.Current Subnet Mask Displays the current Subnet Mask.EtherNet MACAddress Displays the MAC address of the unit.3. Once the parameters above have been set, check the Confirm The Operationcheck box and then click Submit.Alert By Mail ConfigurationThis function allows you to configure the system to send an email to specified email addresseswhen an event occurs. To configure the Alert By Mail function, follow the procedure below:1. From the navigation panel, select Alert By Mail Config. The email alert parameters aredisplayed in the information panel. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine