Xerox SquareFold Trimmer Module User Manual

Also see for SquareFold Trimmer Module: User guide

Contents

Xerox SquareFold Trimmer Module User Manual Manual pdf 9 page image

OverviewUser Guide 5SquareFold Trimmer ModuleFrom the machine's UI select Copy and the Output Format tab.Square Fold featureAccessing the Square Fold optionsThe Square Fold feature can be selected for both your copy and network print jobs. Depending on the copy/print job,the Square Fold feature can be selected from either the machine's UI or from the print driver on your workstation.If your machine is connected to a print server, the Square Fold feature can also be selected at the print server for theselected job.The Square Fold feature is available only when your machine is connected to both a finisher with a booklet maker andthe SquareFold Trimmer Module.NoteTo access the Square Fold feature, perform one of the following (as applicable for your copy or network print job):1.For copy jobs, perform the following:Select either Booklet Creation or Folding.- If using the Booklet Creation feature, continue to Step 3.- If using only the Folding feature, continue to Step 4.2.From the Booklet Creation screen, select On and Fold & Staple.- From the Booklet Creation - Fold & Staple screen, select either Fold Only or Fold & Staple.- To access the Square Fold feature, select the Booklet Trimming/Pressing button.3.The term "Book Pressing" is used synonymously with the terms "Square Fold" or "Square Folding."TipThe Square Fold (Book Pressing) feature and its related options are discussed in the section entitled "Square Foldoptions."NoteFrom the Folding screen, select Single Fold.- Select Fold as a Set.- Select the Booklet Trimming/Pressing button to access the Square Fold (Book Pressing) feature.4.