Xerox Trimmer Module SquareFold User Manual

Also see for SquareFold Trimmer Module: User guide

Contents

Xerox Trimmer Module SquareFold User Manual Manual pdf 10 page image

SquareFold Trimmer User Guide6Overview1.2.3.4.5.The Square Fold Settings are found on the SquareFoldTrimmer Module control panel. The settings can be switchedon or off based on user preference. When the settings areswitched on, you can select one of five options depending onyour requirements for the finished booklet job:+2: Use this setting when you want the most amount ofpressure applied to the spine of the booklet. The morepressure applied to the booklet, the more square the bookletspine will be. +2 is the greatest amount of pressure that canbe applied to the booklet.Additionally, you may want to select this setting when yourfinished booklet is five pages or less and on heavier weightpaper (200 g/m² or greater).+1: Use this setting when you want a greater amount ofpressure applied to the spine of the booklet, but not as muchpressure as the +2 setting uses.Square Fold Settings5.4.3.2.1.Auto: This is the machine default setting and is used formost jobs.-1: Use this setting when you want less pressure applied tothe spine of the booklet. The less pressure applied to thebooklet, the more rounded the booklet spine will be.-2: Select this setting when your finished booklet is five pagesor less and on lighter weight paper (100 g/m² or lower). -2 isthe least amount of pressure that can be applied to thebooklet.Choose the setting that best fits your needs for the bookletoutput.Note: You may want to run one or more test prints/copiesbefore running larger jobs.