XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL 174. MediaThis chapter provides the following information: The procedure for loading roll media into the media drawers The procedure for bypassing the media drawers and manuallyfeeding pre-cut sheets into the printer An explanation of the dehumidifier feature.For information about the media sizes and types that the printercan accommodate, refer to the "Specification" chapter of thismanual.Adding Media RollsWhen roll media in use is empty, the Media Empty Indicator on theOperation Panel remains on steady.To load a new roll media, follow the instructions in the "LoadingThe Roll Media" sections of this chapter.NOTE: Roll sizes 880 mm, 891 mm and 900 mm can be loaded in MediaDrawer 1 only. The printer is set for 900 mm size. To enable880 mm or 891 mm sizes, contact XEROX Service.NOTE: B3 media should not be loaded in drawer 1. If B3 media is loadedin drawer 1, the printer will report the size as either A3 or 11îmedia.Exp-CleanWire-CleanPaper Deck1 2 3 4Select CutMFD1D2D3 D4PFExitCopy Density Menu Enter OnlineMedia Empty Indicator
