USER MODESXEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL 51User Mode 2 (Date and Time setting) ìU2îEnter User Mode 2 to set the correct date and time.Note: Although there will be no performance problems if the dateand time are incorrect, the printer automatically records the dateand time errors occur. This information can be critical for serviceproblem solving. It is recommended the date and time be setcorrectly.1. To enter User Mode 2:Press the [Menu] Key twice when the printer is in the Standby(idle) Mode.The [Menu] Key lights green and the Status Display indicates ìU2.îflashing on the left side of the display.2. Press the [ <-- ] Key.C6 appears in the left side of the display and the scrolling secondstime is displayed in the right side of the display. The seconds cannow be changed.3. To change the seconds, press [Enter].The seconds stop scrolling and begin to flash.4. To change the value, press the [ --> ] Key to increase thevalue and [ <-- ] Key to decrease the value.5. Press [Enter] to store the value.There are 6 setting locations: C6 - seconds, C5 - minutes, C4 -hour, C3 - day, C2 - month, C1 - year, in sequence with eachpress of the [ <-- ] Key.Menu Enter OnlineMenu Enter OnlinePress [Menu] twice
