Probable Causes SolutionsUsing unsupported paper. Use only Xerox-approved paper. For details, refer toSupported Paper.Humidity is too high for coated paper. Feed paper one sheet at a time.PPaappeerr MMiissffeeeeddssProbable Causes SolutionsThe paper is not correctly positioned in the tray. • Remove the misfed paper and reposition itproperly in the tray.• Adjust the paper guides in the tray to match thesize of the paper.The paper tray is too full. Remove some of the paper. Do not load paper pastthe fill line.The paper guides are not correctly adjusted to thepaper size.Adjust the paper guides in the tray to match the sizeof the paper.The tray contains warped or wrinkled paper. Remove the paper, smooth it out, and reload it. If itstill misfeeds, do not use that paper.The paper is moist from humidity. Remove the moist paper and replace it with new, drypaper.Using paper of the wrong size, thickness, or type. Use only Xerox approved paper. For details, refer toSupported Paper.LLaabbeell aanndd EEnnvveellooppee MMiissffeeeeddssProbable Causes SolutionsLabels are missing, curled, or are pulling away fromthe backing sheet.Do not use any sheet where labels are missing,curled, or pulled away from the backing sheet.The label sheet is facing the wrong way in the tray. • Load label sheets according to the instructionsfrom the manufacturer.• Load labels print side up in the bypass tray.• Do not load labels in the high-capacity feeder.186 Xerox® WorkCentre® 3335/3345 Multifunction PrinterUser GuideTroubleshooting
