Ease of Use April 2009Xerox WorkCentre 4260 XFwww.BERTL.comCopyright © 2009 BERTL Inc. April 2009All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. Thisdocument may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictlyprohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.Page 30To remove the empty staples cartridge, users must open the frontcover and on the left side of the machine they must press downon the tan handle to slide and replace the cartridge.MISFEED ACCESSIf a misfeed or another error occurs on the WorkCentre4260 images instructing the user on corrective measuresare indicated on the touch screen as shown above.In order to access any misfeeds that may occur in the automaticdocument feeder, the user lifts up this cover.To access the fuser and side misfeed-access area, the user firstopens the side cover door and removes any misfeeds that arejammed in the paper path.Paper jams can also occur at the start of the paper path locatedat the paper drawers. To remove any paper jams in this section,users must open the cover located under the bypass tray andsimply remove the paper.CLIENT UTILITIESIn order to take the best and most efficient advantage of adevice and its capabilities, as well as ensure maximumuptime, clients need an efficient way to access and monitorthe device. This is true whether the device is an MFP,printer, or scanner.Most general users want to know first if a device is capableof handling a particular job—for instance, if it hasduplexing, color capability; supports specific media sizes,