Xerox WorkCentre 5020DN User Manual

Also see for WorkCentre 5020: User guide Specification Specifications Detailed specifications System administrator guide

Contents

Xerox WorkCentre 5020DN User Manual Manual pdf 40 page image

3 Loading Paper40Supported Paper TypesThe following table shows the paper types that are supported by each of the trays andthe Duplex Module.O: AvailableX: Not available*: Paper weight is 70 - 90 g/m2 for the Duplex ModuleStoring and Handling PaperStoring paper• Store paper in dry conditions. Paper that has absorbed moisture can cause paperjams and image quality deterioration.• Once you remove the packaging from the paper, keep the unused paper wrapped.To reduce moisture, apply preventive measures such as placing desiccant (moistureabsorber) in the storage area.• Paper should be stored on a flat surface to prevent creasing or warping.Loading paper into the trays• Align the edges of the paper stack neatly before loading it in the trays.• Do not use paper that is folded, creased, curled, or badly damaged.• Do not load paper of mixed sizes together in the trays.• Transparencies and labels often cause paper jams if any sheets are stuck together.Fan the edges well before loading.• When continuously printing onto transparencies, remove them from the Output Trayevery 20 sheets or so to prevent them from sticking together.• When loading labels in the tray, if any of the labels have already been peeled off orcut off, it may cause a paper jam.Paper Type Weight(g/m 2 ) Tray 1 Tray 2 BypassTrayDuplexModulePlain Paper 60 - 90 O O O O*Recycled Paper O O O OTransparencies - X X O XLabels - O O O XHeavyweight 90 - 110 X X O X